Samba As Domain Controller

Setup Details

hostname: infrabase1 Network: 10.1.65.0/24 IP Address : 10.1.65.11 Subnet Mask: 255.255.255.0 Gateway: 10.1.65.1 DNS: 8.8.8.8 sudo user: kedar VM: atezworldad1 Network: 10.1.65.0/24 IP Address : 10.1.65.109 Subnet Mask: 255.255.255.0 Gateway: 10.1.65.1 DNS: 8.8.8.8 sudo user: kedar User PC Details PC type: Desktop OS: Ubuntu Desktop IP Address: 10.1.65.160

Before you proceed

The domain used here is atez.world. This is used only for demonstration. You should use your own domain to configure the active directory domain. This installation uses Ubuntu 22.04 server OS and uses the samba available in the repository provided and maintained by Canonical. Users should note that this is done to ensure, any vulnerabilities and fixes released for samba are provided by canonical and are generally safe to apply. Samba can be installed by compiling from source, however, any patches and fixes need re-compilation.

Introduction

• We shall be creating an active directory with domain as: atez.world
• We shall be enabling TLS by default and also enabling LDAPS for connecting to AD on a secure port
• We shall be using a self signed SSL certificate

Pre-requisites installation

• Log into the server and run the below commands

ssh kedar@10.1.65.109
sudo systemctl stop systemd-resolved
sudo systemctl disable systemd-resolved

• Add nameserver in resolv.conf

sudo unlink /etc/resolv.conf
sudo nano /etc/resolv.conf
nameserver 8.8.8.8

• Install & Configure Chrony NTP server
• Install

sudo apt install chrony

• Configure by editing the file /etc/chrony/chrony.conf

pool ntp.ubuntu.com        iburst maxsources 4
pool 0.in.pool.ntp.org iburst maxsources 1
pool 1.in.pool.ntp.org iburst maxsources 1
pool 2.in.pool.ntp.org iburst maxsources 2

• Restart & Check if chrony is working

sudo systemctl restart chrony
sudo systemctl status chronyd
sudo chronyc tracking

• Install and configure other pre-requisites

sudo apt update && sudo apt upgrade -y
sudo timedatectl set-timezone Asia/Kolkata

Install samba and utils

sudo apt install samba krb5-user krb5-config winbind libpam-winbind libnss-winbind net-tools openssl

'''Add ATEZ.WORLD three times (any domain you want to enter should be in CAPS)'''

sudo systemctl stop samba-ad-dc.service smbd.service nmbd.service winbind.service
sudo systemctl disable samba-ad-dc.service smbd.service nmbd.service winbind.service
sudo mv /etc/samba/smb.conf /etc/samba/smb.bak

=Provisioning the domain controller

sudo samba-tool domain provision --use-rfc2307 --interactive

Update the /etc/samba/smb.conf file with the below content

# Global parameters
[global]
        dns forwarder = 8.8.8.8
        netbios name = ATEZWORLDAD1
        realm = ATEZ.WORLD
        server role = active directory domain controller
        workgroup = ATEZ
        idmap_ldb:use rfc2307 = yes

        server role check:inhibit = yes
        template shell = /bin/bash
        template homedir = /home/%U
        winbind use default domain = true
        winbind offline logon = false
        winbind nss info = rfc2307
        winbind enum users = yes
        winbind enum groups = yes

        server signing = auto
        dsdb:schema update allowed = yes
        ldap server require strong auth = no
        drs:max object sync = 1200

        rpc server dynamic port range = 49152-65535
        #interfaces = lo,eth0
        #bind interfaces only = yes

        map to guest = Bad User
        log level = 3 auth_json_audit:5@/var/log/samba/samba_audit.log
        log file = /var/log/samba/samba.log
        max log size = 100000

        #lanman auth = yes
        ntlm auth = yes

        password hash userPassword schemes = CryptSHA256 CryptSHA512

        tls enabled = yes
        tls keyfile = tls/atezworldkey.pem
        tls certfile = tls/atezworldcert.pem
        tls cafile =
        
        # sysvol write log
        full_audit:failure = none
        full_audit:success = pwrite write renameat unlinkat
        full_audit:prefix = IP=%I|USER=%u|MACHINE=%m|VOLUME=%S
        full_audit:facility = local7
        full_audit:priority = NOTICE

        # disable null session
        restrict anonymous = 2

        # disable printing services
        printcap name = /dev/null
        load printers = no
        disable spoolss = yes
        printing = bsd

[sysvol]
        path = /var/lib/samba/sysvol
        read only = No
        vfs objects = dfs_samba4, acl_xattr, full_audit

[netlogon]
        path = /var/lib/samba/sysvol/atez.world/scripts
        read only = No
        vfs objects = dfs_samba4, acl_xattr, full_audit

Generate self-signed certificate

• Using openssl libraries create self signed certifcate and
• Store the self signed certificate in /var/lib/samba/private/tls.
• If the above folder does not exist, you can create it.

cd /var/lib/samba/private/tls
openssl req -newkey rsa:2048 -keyout atezworldkey.pem -nodes -x509 -days 3650 -out atezworldcert.pem

• Answer relevant questions as below

AU : IN
State or Province Name : Maharashtra
City : Mumbai
Company Name : Atez World
Organization Unit : corpit
Comman Name : atezworldad1.atez.world
Email Address : admin@atez.world

• Unlink kerberos, unmask and restart samba dc service

sudo mv /etc/krb5.conf /etc/krb5.conf.initial
sudo cp /var/lib/samba/private/krb5.conf /etc/krb5.conf
sudo systemctl unmask samba-ad-dc.service
sudo systemctl restart samba-ad-dc.service
sudo systemctl status samba-ad-dc.service

• Check if samba is running

sudo netstat -plant |egrep '[smbd|samba]'

• Change the nameservers in netplan and change the gateway4 argument as it is now deprecated

sudo nano /etc/netplan/00-installer-config.yaml

network:
  ethernets:
    ens18:
      addresses:
      - 10.1.65.109/24
#      gateway4: 172.16.141.1
      nameservers:
        addresses:
        - 10.1.65.109
        search: [ATEZ.WORLD]
      routes:
      - to: default
        via: 10.1.65.1 
  version: 2

Save the file and restart netplan by: sudo netplay apply

• Add winbind option to /etc/nsswitch.conf

passwd:         files systemd winbind
group:          files systemd winbind
shadow:         files
gshadow:        files

hosts:          files dns
networks:       files

protocols:      db files
services:       db files
ethers:         db files
rpc:            db files

netgroup:       nis

• edit /etc/resolv.conf file and add the relevant details

sudo nano /etc/resolv.conf
nameserver 10.1.65.109
search atez.world

• Restart Samba Service

sudo systemctl restart samba-ad-dc.service
sudo systemctl status samba-ad-dc.service

• Restart the server

sudo init 6

• Edit /tec/hosts file and add correct hostnames

10.1.65.109  atezworldad1.atez.world atezworldad1

Validate if samba is working correctly

• Check the kerberos tickets

sudo kinit administrator

• Check if DC is resolving to the correct name

sudo host -t srv _kerberos._udp.atez.world 
host -t srv _ldap._tcp.atez.world

• sudo netstat -plant |egrep '[smbd|samba]'

User and groups management

• Create a User in samba using samba tool

sudo samba-tool user create kedar
sudo samba-tool user setpassword kedar (Do not avoid this step even if you have kept a password in the above step)

• Edit user attributes & add the following attributes to the end of the file

sudo samba-tool user edit kedar

mail: kedar@atez.world
givenName: Kedar
sn: Atez
mobile: 98xxxxxxxxx

• Add groups

sudo samba-tool group add z-license-allocation
sudo samba-tool group add z-admins

• Add users to the groups

sudo samba-tool group addmembers z-admins kedar
sudo samba-tool group addmembers z-license-allocation kedar

• List the members in groups

sudo samba-tool group listmembers z-license-allocation
sudo samba-tool group listmembers z-admins

Conclusion

• We have a working Samba Active Directory.
• Using a RSA tool, access and manage the Active Directory
• You can add multiple domain controllers to this architecture and make it more robust